Erreurs dans « katepart_advanced.po »
du module applications.
Le fichier katepart_advanced.po comporte :
Violation de règles de traduction :
Message n°191,
Original : | <command>each</command> 'function(lines){return lines.join(", ")}' |
---|---|
Traduction : | <command>each</command> 'function(lines){return lines.join(", ")}' |
Utiliser de vrais guillemets (alt-gr w, z ou x), au lieu de guillemets anglais (homogénéité)
Message n°193,
Original : | <command>each</command> 'lines.join(", ")' |
---|---|
Traduction : | <command>each</command> 'lines.join(", ")' |
Utiliser de vrais guillemets (alt-gr w, z ou x), au lieu de guillemets anglais (homogénéité)
Message n°201,
Original : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
---|---|
Traduction : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
Mettre une espace insécable avant et une espace après
Message n°201,
Original : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
---|---|
Traduction : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
Utiliser de vrais guillemets (alt-gr w, z ou x), au lieu de guillemets anglais (homogénéité)
Message n°202,
Original : | <command>map</command> 'line.replace(/^s+/,"")' |
---|---|
Traduction : | <command>map</command> 'line.replace(/^s+/,"")' |
Utiliser de vrais guillemets (alt-gr w, z ou x), au lieu de guillemets anglais (homogénéité)
Fautes d'orthographe :
Message n°30,
Original : | <command>set-tab-width</command><arg choice="req">INTEGER width</arg> |
---|---|
Traduction : | <command>set-tab-width</command><arg choice="req">ENTIER largeur</arg> |
Message n°32,
Original : | <command>set-indent-width</command><arg choice="req">INTEGER width</arg> |
---|---|
Traduction : | <command>set-indent-width</command><arg choice="req">ENTIER largeur</arg> |
À la ligne 250
Rapporter un faux positif
Suggestions :
- « indente »
- « indenté »
- « IDENT »
- « iodent »
- « in dent »
Message n°32,
Original : | <command>set-indent-width</command><arg choice="req">INTEGER width</arg> |
---|---|
Traduction : | <command>set-indent-width</command><arg choice="req">ENTIER largeur</arg> |
Message n°33,
Original : | Sets the indentation width to the number <userinput>width</userinput>. Used only if you are indenting with spaces. |
---|---|
Traduction : | Associe la largeur d'indentation au nombre <userinput>largeur</userinput>. Utilisé seulement si vous indentez avec des espaces. |
À la ligne 257
Rapporter un faux positif
Suggestions :
- « indente »
- « indenté »
- « intentez »
- « indenter »
- « indentée »
Message n°34,
Original : | <command>set-word-wrap-column</command><arg choice="req">INTEGER width</arg> |
---|---|
Traduction : | <command>set-word-wrap-column</command><arg choice="req">ENTIER largeur</arg> |
Message n°34,
Original : | <command>set-word-wrap-column</command><arg choice="req">INTEGER width</arg> |
---|---|
Traduction : | <command>set-word-wrap-column</command><arg choice="req">ENTIER largeur</arg> |
À la ligne 264
Rapporter un faux positif
Suggestions :
- « COLUMN »
- « COLUMNS »
- « Kolum »
- « colin »
- « commun »
Message n°38,
Original : | <command>set-folding-markers</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-folding-markers</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 292
Rapporter un faux positif
Suggestions :
- « holding »
- « fol ding »
- « fol-ding »
- « holdings »
- « footing »
Message n°38,
Original : | <command>set-folding-markers</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-folding-markers</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 292
Rapporter un faux positif
Suggestions :
- « marqueurs »
- « margeurs »
- « marieurs »
- « marneurs »
- « markey »
Message n°40,
Original : | <command>set-line-numbers</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-line-numbers</command><arg choice="req">BOOLÉEN activer</arg> |
Message n°40,
Original : | <command>set-line-numbers</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-line-numbers</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 306
Rapporter un faux positif
Suggestions :
- « number »
- « num bers »
- « num-bers »
- « nimbera »
- « nimberas »
Message n°42,
Original : | <command>set-replace-tabs</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-replace-tabs</command><arg choice="req">BOOLÉEN activer</arg> |
Message n°46,
Original : | <command>set-show-tabs</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-show-tabs</command><arg choice="req">BOOLÉEN activer</arg> |
Message n°48,
Original : | <command>set-show-indent</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-show-indent</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 362
Rapporter un faux positif
Suggestions :
- « indente »
- « indenté »
- « IDENT »
- « iodent »
- « in dent »
Message n°50,
Original : | <command>set-indent-spaces</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-indent-spaces</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 376
Rapporter un faux positif
Suggestions :
- « indente »
- « indenté »
- « IDENT »
- « iodent »
- « in dent »
Message n°50,
Original : | <command>set-indent-spaces</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-indent-spaces</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 376
Rapporter un faux positif
Suggestions :
- « Space »
- « space »
- « espaces »
- « espacés »
- « spasmes »
Message n°52,
Original : | <command>set-mixed-indent</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-mixed-indent</command><arg choice="req">BOOLÉEN activer</arg> |
Message n°52,
Original : | <command>set-mixed-indent</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-mixed-indent</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 390
Rapporter un faux positif
Suggestions :
- « indente »
- « indenté »
- « IDENT »
- « iodent »
- « in dent »
Message n°54,
Original : | When executed, this command will additionally set space indentation enabled, and if the indent width is unspecified it will be set to half of the <option>tab-width</option> for the document at the time of execution. |
---|---|
Traduction : | Lorsqu'elle est exécutée, cette commande définit en outre l'indentation avec des espaces activée et, si la largeur d'indentation n'est pas spécifiée, elle est définie à la moitié de la <option>tab-width</option> du document au moment de l'exécution. |
Message n°55,
Original : | <command>set-word-wrap</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-word-wrap</command><arg choice="req">BOOLÉEN largeur</arg> |
Message n°57,
Original : | <command>set-replace-tabs-save</command><arg choice="req">BOOLEAN enable </arg> |
---|---|
Traduction : | <command>set-replace-tabs-save</command><arg choice="req">BOOLÉEN activer</arg> |
Message n°57,
Original : | <command>set-replace-tabs-save</command><arg choice="req">BOOLEAN enable </arg> |
---|---|
Traduction : | <command>set-replace-tabs-save</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 425
Rapporter un faux positif
Suggestions :
- « sanve »
- « salve »
- « savez »
- « slave »
- « suave »
Message n°59,
Original : | <command>set-remove-trailing-space-save</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-remove-trailing-space-save</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 439
Rapporter un faux positif
Suggestions :
- « sanve »
- « salve »
- « savez »
- « slave »
- « suave »
Message n°61,
Original : | <command>set-indent-mode</command><arg choice="req">STRING name</arg> |
---|---|
Traduction : | <command>set-indent-mode</command><arg choice="req">nom de CHAÎNE</arg> |
À la ligne 453
Rapporter un faux positif
Suggestions :
- « indente »
- « indenté »
- « IDENT »
- « iodent »
- « in dent »
Message n°62,
Original : | Sets the autoindentation mode to <userinput>name</userinput>. If <userinput>name</userinput> is not known, the mode is set to 'none'. Valid modes are 'none', 'normal', 'cstyle', 'haskell', 'lilypond', 'lisp', 'python', 'ruby' and 'xml'. |
---|---|
Traduction : | Définit le mode d'indentation automatique à <userinput>nom</userinput>. Si <userinput>nom</userinput> n'est pas connu, le mode est associé à « none ». Les modes autorisés sont « aucun », « normal », « cstyle », « haskell », « lilypond », « lisp », « python », « ruby » et « xml ». |
À la ligne 460
Rapporter un faux positif
Suggestions :
- « style »
- « stylé »
- « astyle »
- « styler »
- « styles »
Message n°62,
Original : | Sets the autoindentation mode to <userinput>name</userinput>. If <userinput>name</userinput> is not known, the mode is set to 'none'. Valid modes are 'none', 'normal', 'cstyle', 'haskell', 'lilypond', 'lisp', 'python', 'ruby' and 'xml'. |
---|---|
Traduction : | Définit le mode d'indentation automatique à <userinput>nom</userinput>. Si <userinput>nom</userinput> n'est pas connu, le mode est associé à « none ». Les modes autorisés sont « aucun », « normal », « cstyle », « haskell », « lilypond », « lisp », « python », « ruby » et « xml ». |
À la ligne 460
Rapporter un faux positif
Suggestions :
- « Haskell »
- « ASpell »
- « Aspell »
- « Häckel »
- « Hazel »
Message n°62,
Original : | Sets the autoindentation mode to <userinput>name</userinput>. If <userinput>name</userinput> is not known, the mode is set to 'none'. Valid modes are 'none', 'normal', 'cstyle', 'haskell', 'lilypond', 'lisp', 'python', 'ruby' and 'xml'. |
---|---|
Traduction : | Définit le mode d'indentation automatique à <userinput>nom</userinput>. Si <userinput>nom</userinput> n'est pas connu, le mode est associé à « none ». Les modes autorisés sont « aucun », « normal », « cstyle », « haskell », « lilypond », « lisp », « python », « ruby » et « xml ». |
À la ligne 460
Rapporter un faux positif
Suggestions :
- « LilyPond »
- « kilopond »
- « kiloponds »
- « l'ilion »
Message n°62,
Original : | Sets the autoindentation mode to <userinput>name</userinput>. If <userinput>name</userinput> is not known, the mode is set to 'none'. Valid modes are 'none', 'normal', 'cstyle', 'haskell', 'lilypond', 'lisp', 'python', 'ruby' and 'xml'. |
---|---|
Traduction : | Définit le mode d'indentation automatique à <userinput>nom</userinput>. Si <userinput>nom</userinput> n'est pas connu, le mode est associé à « none ». Les modes autorisés sont « aucun », « normal », « cstyle », « haskell », « lilypond », « lisp », « python », « ruby » et « xml ». |
Message n°63,
Original : | <command>set-auto-ident</command><arg choice="req">BOOLEAN script</arg> |
---|---|
Traduction : | <command>set-auto-ident</command><arg choice="req">BOOLÉEN script</arg> |
À la ligne 467
Rapporter un faux positif
Suggestions :
- « IDENT »
- « identd »
- « iodent »
- « dent »
- « bident »
Message n°70,
Original : | <command>nn[oremap]</command><arg choice="req">STRING original</arg> <arg choice="req">STRING mapped</arg> |
---|---|
Traduction : | <command>nn[oremap]</command><arg choice="req">CHAÎNE original</arg> <arg choice="req">CHAÎ mappé</arg> |
Message n°70,
Original : | <command>nn[oremap]</command><arg choice="req">STRING original</arg> <arg choice="req">STRING mapped</arg> |
---|---|
Traduction : | <command>nn[oremap]</command><arg choice="req">CHAÎNE original</arg> <arg choice="req">CHAÎ mappé</arg> |
À la ligne 517
Rapporter un faux positif
Suggestions :
- « noremap »
- « TreeMap »
- « Preamp »
- « créma »
- « tréma »
Message n°70,
Original : | <command>nn[oremap]</command><arg choice="req">STRING original</arg> <arg choice="req">STRING mapped</arg> |
---|---|
Traduction : | <command>nn[oremap]</command><arg choice="req">CHAÎNE original</arg> <arg choice="req">CHAÎ mappé</arg> |
Message n°70,
Original : | <command>nn[oremap]</command><arg choice="req">STRING original</arg> <arg choice="req">STRING mapped</arg> |
---|---|
Traduction : | <command>nn[oremap]</command><arg choice="req">CHAÎNE original</arg> <arg choice="req">CHAÎ mappé</arg> |
À la ligne 517
Rapporter un faux positif
Suggestions :
- « nappe »
- « nappé »
- « napper »
- « nappes »
- « nappés »
Message n°71,
Original : | Map the key sequence <userinput>original</userinput> to <userinput>mapped</userinput>. |
---|---|
Traduction : | Mappe la séquence de touches <userinput>original</userinput> vers <userinput>mappé</userinput>. |
À la ligne 524
Rapporter un faux positif
Suggestions :
- « Nappe »
- « Nappé »
- « Napper »
- « Nappes »
- « Nappés »
Message n°71,
Original : | Map the key sequence <userinput>original</userinput> to <userinput>mapped</userinput>. |
---|---|
Traduction : | Mappe la séquence de touches <userinput>original</userinput> vers <userinput>mappé</userinput>. |
À la ligne 524
Rapporter un faux positif
Suggestions :
- « nappe »
- « nappé »
- « napper »
- « nappes »
- « nappés »
Message n°148,
Original : | <command>s///[ig]</command> <command>%s///[ig]</command> |
---|---|
Traduction : | <command>s///[ig]</command> <command>%s///[ig]</command> |
Message n°148,
Original : | <command>s///[ig]</command> <command>%s///[ig]</command> |
---|---|
Traduction : | <command>s///[ig]</command> <command>%s///[ig]</command> |
Message n°154,
Original : | Your friendly compiler just stopped, telling you that the class <classname>myClass</classname> mentioned in line 3902 in your source file is not defined. |
---|---|
Traduction : | Votre compilateur préféré vient de s'arrêter en vous indiquant que la classe <classname>maClasse</classname> mentionnée à la ligne 3902 de votre fichier source n'est pas définie. |
À la ligne 1109
Rapporter un faux positif
Suggestions :
- « maclasse »
- « maclasses »
- « maculasse »
- « bâclasse »
- « raclasse »
Message n°155,
Original : | "Buckle!" you think, it is of course <classname>MyClass</classname>. You go to line 3902, and instead of trying to find the word in the text, you launch the Editing Command Dialog, enter <userinput>s/myclass/MyClass/i</userinput>, hit the <guibutton>OK</guibutton> button, save the file and compile – successfully without the error. |
---|---|
Traduction : | Il s'agit évidemment de <classname>MaClasse</classname> ! Allez à la ligne 3902 et, au lieu d'essayer de trouver le mot dans le texte, ouvrez la boîte de dialogue Commande d'édition, saisissez <userinput>s/maClasse/MaClasse/i</userinput>, cliquez sur le bouton <guibutton>Ok</guibutton>, enregistrez le fichier et compilez – avec succès, sans l'erreur. |
À la ligne 1116
Rapporter un faux positif
Suggestions :
- « Maclasse »
- « Maclasses »
- « Maculasse »
- « Bâclasse »
- « Raclasse »
Message n°155,
Original : | "Buckle!" you think, it is of course <classname>MyClass</classname>. You go to line 3902, and instead of trying to find the word in the text, you launch the Editing Command Dialog, enter <userinput>s/myclass/MyClass/i</userinput>, hit the <guibutton>OK</guibutton> button, save the file and compile – successfully without the error. |
---|---|
Traduction : | Il s'agit évidemment de <classname>MaClasse</classname> ! Allez à la ligne 3902 et, au lieu d'essayer de trouver le mot dans le texte, ouvrez la boîte de dialogue Commande d'édition, saisissez <userinput>s/maClasse/MaClasse/i</userinput>, cliquez sur le bouton <guibutton>Ok</guibutton>, enregistrez le fichier et compilez – avec succès, sans l'erreur. |
À la ligne 1116
Rapporter un faux positif
Suggestions :
- « maclasse »
- « maclasses »
- « maculasse »
- « bâclasse »
- « raclasse »
Message n°155,
Original : | "Buckle!" you think, it is of course <classname>MyClass</classname>. You go to line 3902, and instead of trying to find the word in the text, you launch the Editing Command Dialog, enter <userinput>s/myclass/MyClass/i</userinput>, hit the <guibutton>OK</guibutton> button, save the file and compile – successfully without the error. |
---|---|
Traduction : | Il s'agit évidemment de <classname>MaClasse</classname> ! Allez à la ligne 3902 et, au lieu d'essayer de trouver le mot dans le texte, ouvrez la boîte de dialogue Commande d'édition, saisissez <userinput>s/maClasse/MaClasse/i</userinput>, cliquez sur le bouton <guibutton>Ok</guibutton>, enregistrez le fichier et compilez – avec succès, sans l'erreur. |
À la ligne 1116
Rapporter un faux positif
Suggestions :
- « Maclasse »
- « Maclasses »
- « Maculasse »
- « Bâclasse »
- « Raclasse »
Message n°158,
Original : | Enter the command line and issue the command <userinput>%s/Miss Jensen/Ms Jones/</userinput> and hit return, you are done. |
---|---|
Traduction : | Sur la ligne de commande, saisissez <userinput>%s/Melle Dupont/Mme Martin/</userinput> et appuyez sur Entrée. Vous avez terminé. |
À la ligne 1137
Rapporter un faux positif
Suggestions :
- « Miellé »
- « Moelle »
- « Mêle »
- « Mêlé »
- « Mlle »
Message n°162,
Original : | void MyClass::DoStringOps( String &foo, String &bar, String *p, int &a, int &b ) |
---|---|
Traduction : | void MyClass::DoStringOps( String &foo, String &bar, String *p, int &a, int &b ) |
À la ligne 1165
Rapporter un faux positif
Suggestions :
- « My Class »
- « My-Class »
- « WMCLASS »
- « Class »
- « Maclasse »
Message n°162,
Original : | void MyClass::DoStringOps( String &foo, String &bar, String *p, int &a, int &b ) |
---|---|
Traduction : | void MyClass::DoStringOps( String &foo, String &bar, String *p, int &a, int &b ) |
Message n°165,
Original : | Output: <computeroutput>void MyClass::DoStringOps( const String &foo, const String &bar, String *p, const int &a, const int &b )</computeroutput> |
---|---|
Traduction : | Sortie : <computeroutput>void MyClass::DoStringOps( const String &foo, const String &bar, String *p, const int &a, const int &b )</computeroutput> |
À la ligne 1186
Rapporter un faux positif
Suggestions :
- « My Class »
- « My-Class »
- « WMCLASS »
- « Class »
- « Maclasse »
Message n°165,
Original : | Output: <computeroutput>void MyClass::DoStringOps( const String &foo, const String &bar, String *p, const int &a, const int &b )</computeroutput> |
---|---|
Traduction : | Sortie : <computeroutput>void MyClass::DoStringOps( const String &foo, const String &bar, String *p, const int &a, const int &b )</computeroutput> |
Message n°166,
Original : | Mission completed! Now, what happened? Well, we looked for some white space (<literal>\s+</literal>) followed by one or more alphabetic characters (<literal>\w+</literal>) followed by some more whitespace (<literal>\s+</literal>) followed by an ampersand, and in the process saved the alphabetic chunk and the ampersand for reuse in the replace operation. Then we replaced the matching part of our line with one whitespace followed by <quote>const</quote> followed by one whitespace followed by our saved alphabetical chunk (<literal>\1</literal>) followed by one whitespace followed by our saved ampersand (<literal>\2</literal>) |
---|---|
Traduction : | Mission réussie ! Mais que s'est-il passé ? Nous avons recherché des blancs (<literal>\s+</literal>), suivis d'un ou plusieurs caractères alphabétiques (<literal>\w+</literal>), eux-mêmes suivis d'un autre blanc (<literal>\s+</literal>) suivi d'une esperluette. Le processus a enregistré le fragment alphanumérique et l'esperluette pour le réutiliser lors de l'opération de remplacement. Puis, nous avons remplacé la partie correspondante de la ligne par un blanc suivi de « const », suivi d'un blanc, suivi de notre fragment alphanumérique enregistré (<literal>\1</literal>), lui-même suivi d'un blanc et de notre esperluette enregistrée (<literal>\2</literal>) |
À la ligne 1193
Rapporter un faux positif
Suggestions :
- « éberluée »
- « éberluées »
- « éberluâtes »
- « éberluerai »
- « éberluait »
Message n°166,
Original : | Mission completed! Now, what happened? Well, we looked for some white space (<literal>\s+</literal>) followed by one or more alphabetic characters (<literal>\w+</literal>) followed by some more whitespace (<literal>\s+</literal>) followed by an ampersand, and in the process saved the alphabetic chunk and the ampersand for reuse in the replace operation. Then we replaced the matching part of our line with one whitespace followed by <quote>const</quote> followed by one whitespace followed by our saved alphabetical chunk (<literal>\1</literal>) followed by one whitespace followed by our saved ampersand (<literal>\2</literal>) |
---|---|
Traduction : | Mission réussie ! Mais que s'est-il passé ? Nous avons recherché des blancs (<literal>\s+</literal>), suivis d'un ou plusieurs caractères alphabétiques (<literal>\w+</literal>), eux-mêmes suivis d'un autre blanc (<literal>\s+</literal>) suivi d'une esperluette. Le processus a enregistré le fragment alphanumérique et l'esperluette pour le réutiliser lors de l'opération de remplacement. Puis, nous avons remplacé la partie correspondante de la ligne par un blanc suivi de « const », suivi d'un blanc, suivi de notre fragment alphanumérique enregistré (<literal>\1</literal>), lui-même suivi d'un blanc et de notre esperluette enregistrée (<literal>\2</literal>) |
À la ligne 1193
Rapporter un faux positif
Suggestions :
- « l'éberluée »
- « l'éberluées »
- « l'éberluâtes »
- « l'éberluerai »
- « l'éberluait »
Message n°166,
Original : | Mission completed! Now, what happened? Well, we looked for some white space (<literal>\s+</literal>) followed by one or more alphabetic characters (<literal>\w+</literal>) followed by some more whitespace (<literal>\s+</literal>) followed by an ampersand, and in the process saved the alphabetic chunk and the ampersand for reuse in the replace operation. Then we replaced the matching part of our line with one whitespace followed by <quote>const</quote> followed by one whitespace followed by our saved alphabetical chunk (<literal>\1</literal>) followed by one whitespace followed by our saved ampersand (<literal>\2</literal>) |
---|---|
Traduction : | Mission réussie ! Mais que s'est-il passé ? Nous avons recherché des blancs (<literal>\s+</literal>), suivis d'un ou plusieurs caractères alphabétiques (<literal>\w+</literal>), eux-mêmes suivis d'un autre blanc (<literal>\s+</literal>) suivi d'une esperluette. Le processus a enregistré le fragment alphanumérique et l'esperluette pour le réutiliser lors de l'opération de remplacement. Puis, nous avons remplacé la partie correspondante de la ligne par un blanc suivi de « const », suivi d'un blanc, suivi de notre fragment alphanumérique enregistré (<literal>\1</literal>), lui-même suivi d'un blanc et de notre esperluette enregistrée (<literal>\2</literal>) |
À la ligne 1193
Rapporter un faux positif
Suggestions :
- « éberluée »
- « éberluées »
- « éberluâtes »
- « éberluerai »
- « éberluait »
Message n°178,
Original : | <command>join</command><arg choice="opt">STRING separator</arg> |
---|---|
Traduction : | <command>join</command><arg choice="opt">STRING séparateur</arg> |
Message n°179,
Original : | Join selected lines or whole document. Optionally takes a parameter defining a separator, for example: <userinput><command>join</command> ', '</userinput> |
---|---|
Traduction : | Assemble les lignes sélectionnées ou le document entier. Prend éventuellement un paramètre définissant un séparateur, par exemple : <userinput><command>join</command> ', '</userinput> |
Message n°188,
Original : | <command>each</command><arg choice="req">STRING script</arg> |
---|---|
Traduction : | <command>each</command><arg choice="req">STRING script</arg> |
Message n°191,
Original : | <command>each</command> 'function(lines){return lines.join(", ")}' |
---|---|
Traduction : | <command>each</command> 'function(lines){return lines.join(", ")}' |
Message n°191,
Original : | <command>each</command> 'function(lines){return lines.join(", ")}' |
---|---|
Traduction : | <command>each</command> 'function(lines){return lines.join(", ")}' |
À la ligne 1369
Rapporter un faux positif
Suggestions :
- « functionF »
- « fonction »
- « fonctions »
- « fiction »
- « faction »
Message n°191,
Original : | <command>each</command> 'function(lines){return lines.join(", ")}' |
---|---|
Traduction : | <command>each</command> 'function(lines){return lines.join(", ")}' |
À la ligne 1369
Rapporter un faux positif
Suggestions :
- « Lines »
- « limes »
- « limés »
- « lianes »
- « lignes »
Message n°191,
Original : | <command>each</command> 'function(lines){return lines.join(", ")}' |
---|---|
Traduction : | <command>each</command> 'function(lines){return lines.join(", ")}' |
À la ligne 1369
Rapporter un faux positif
Suggestions :
- « Lines »
- « limes »
- « limés »
- « lianes »
- « lignes »
Message n°191,
Original : | <command>each</command> 'function(lines){return lines.join(", ")}' |
---|---|
Traduction : | <command>each</command> 'function(lines){return lines.join(", ")}' |
Message n°193,
Original : | <command>each</command> 'lines.join(", ")' |
---|---|
Traduction : | <command>each</command> 'lines.join(", ")' |
Message n°193,
Original : | <command>each</command> 'lines.join(", ")' |
---|---|
Traduction : | <command>each</command> 'lines.join(", ")' |
À la ligne 1383
Rapporter un faux positif
Suggestions :
- « Lines »
- « limes »
- « limés »
- « lianes »
- « lignes »
Message n°193,
Original : | <command>each</command> 'lines.join(", ")' |
---|---|
Traduction : | <command>each</command> 'lines.join(", ")' |
Message n°194,
Original : | <command>filter</command><arg choice="req">STRING script</arg> |
---|---|
Traduction : | <command>filter</command><arg choice="req">STRING script</arg> |
À la ligne 1390
Rapporter un faux positif
Suggestions :
- « filtre »
- « filtré »
- « fileter »
- « filtrer »
- « filer »
Message n°197,
Original : | <command>filter</command> 'function(1){return 1.length > 0;}' |
---|---|
Traduction : | <command>filter</command> 'function(1){return 1.length > 0;}' |
À la ligne 1412
Rapporter un faux positif
Suggestions :
- « filtre »
- « filtré »
- « fileter »
- « filtrer »
- « filer »
Message n°197,
Original : | <command>filter</command> 'function(1){return 1.length > 0;}' |
---|---|
Traduction : | <command>filter</command> 'function(1){return 1.length > 0;}' |
À la ligne 1412
Rapporter un faux positif
Suggestions :
- « functionF »
- « fonction »
- « fonctions »
- « fiction »
- « faction »
Message n°198,
Original : | <command>filter</command> 'line.length > 0' |
---|---|
Traduction : | <command>filter</command> 'line.length > 0' |
À la ligne 1419
Rapporter un faux positif
Suggestions :
- « filtre »
- « filtré »
- « fileter »
- « filtrer »
- « filer »
Message n°198,
Original : | <command>filter</command> 'line.length > 0' |
---|---|
Traduction : | <command>filter</command> 'line.length > 0' |
Message n°201,
Original : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
---|---|
Traduction : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
À la ligne 1441
Rapporter un faux positif
Suggestions :
- « functionF »
- « fonction »
- « fonctions »
- « fiction »
- « faction »
Message n°201,
Original : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
---|---|
Traduction : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
Message n°201,
Original : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
---|---|
Traduction : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
Message n°202,
Original : | <command>map</command> 'line.replace(/^s+/,"")' |
---|---|
Traduction : | <command>map</command> 'line.replace(/^s+/,"")' |
Message n°206,
Original : | <command>goto</command><arg choice="req">INT line</arg> |
---|---|
Traduction : | <command>goto</command><arg choice="req">INT ligne</arg> |
Message n°210,
Original : | <command>find</command><arg choice="req">STRING pattern</arg> |
---|---|
Traduction : | <command>find</command><arg choice="req">STRING motif</arg> |
Message n°212,
Original : | The find command can be configured by appending a colon followed by one or more options, the form is <userinput>find:options pattern</userinput>. The following options are supported: |
---|---|
Traduction : | Il est possible de configurer la commande Chercher en ajoutant à la fin un caractère « : », suivi d'une ou plusieurs options. La forme est <userinput>find:options motif</userinput>. Les options suivantes sont prises en charge : |
Message n°213,
Original : | <command>ifind</command><arg choice="req">STRING pattern</arg> |
---|---|
Traduction : | <command>ifind</command><arg choice="req">STRING motif</arg> |
Message n°223,
Original : | Save and close the current document only if it has changed. |
---|---|
Traduction : | Enregistre et ferme le document actuel uniquement s'ii a changé. |
Dernière vérification : Tue Apr 16 23:01:25 2024 (actualisée une fois par semaine).