Erreurs dans « katepart_advanced.po »
Le fichier katepart_advanced.po comporte :
Violation de règles de traduction :
Message n°191,
Original : | <command>each</command> 'function(lines){return lines.join(", ")}' |
---|---|
Traduction : | <command>each</command> 'function(lines){return lines.join(", ")}' |
Utiliser de vrais guillemets (alt-gr w, z ou x), au lieu de guillemets anglais (homogénéité)
Message n°193,
Original : | <command>each</command> 'lines.join(", ")' |
---|---|
Traduction : | <command>each</command> 'lines.join(", ")' |
Utiliser de vrais guillemets (alt-gr w, z ou x), au lieu de guillemets anglais (homogénéité)
Message n°201,
Original : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
---|---|
Traduction : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
Mettre une espace insécable avant et une espace après
Message n°201,
Original : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
---|---|
Traduction : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
Utiliser de vrais guillemets (alt-gr w, z ou x), au lieu de guillemets anglais (homogénéité)
Message n°202,
Original : | <command>map</command> 'line.replace(/^s+/,"")' |
---|---|
Traduction : | <command>map</command> 'line.replace(/^s+/,"")' |
Utiliser de vrais guillemets (alt-gr w, z ou x), au lieu de guillemets anglais (homogénéité)
Fautes d'orthographe :
Message n°30,
Original : | <command>set-tab-width</command><arg choice="req">INTEGER width</arg> |
---|---|
Traduction : | <command>set-tab-width</command><arg choice="req">ENTIER largeur</arg> |
Message n°32,
Original : | <command>set-indent-width</command><arg choice="req">INTEGER width</arg> |
---|---|
Traduction : | <command>set-indent-width</command><arg choice="req">ENTIER largeur</arg> |
À la ligne 251
Rapporter un faux positif
Suggestions :
- « indente »
- « indenté »
- « IDENT »
- « iodent »
- « in dent »
Message n°32,
Original : | <command>set-indent-width</command><arg choice="req">INTEGER width</arg> |
---|---|
Traduction : | <command>set-indent-width</command><arg choice="req">ENTIER largeur</arg> |
Message n°33,
Original : | Sets the indentation width to the number <userinput>width</userinput>. Used only if you are indenting with spaces. |
---|---|
Traduction : | Associe la largeur d'indentation au nombre <userinput>largeur</userinput>. Utilisé seulement si vous indentez avec des espaces. |
À la ligne 258
Rapporter un faux positif
Suggestions :
- « indente »
- « indenté »
- « intentez »
- « indenter »
- « indentée »
Message n°34,
Original : | <command>set-word-wrap-column</command><arg choice="req">INTEGER width</arg> |
---|---|
Traduction : | <command>set-word-wrap-column</command><arg choice="req">ENTIER largeur</arg> |
Message n°34,
Original : | <command>set-word-wrap-column</command><arg choice="req">INTEGER width</arg> |
---|---|
Traduction : | <command>set-word-wrap-column</command><arg choice="req">ENTIER largeur</arg> |
À la ligne 265
Rapporter un faux positif
Suggestions :
- « COLUMN »
- « COLUMNS »
- « Kolum »
- « colin »
- « commun »
Message n°38,
Original : | <command>set-folding-markers</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-folding-markers</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 293
Rapporter un faux positif
Suggestions :
- « holding »
- « fol ding »
- « fol-ding »
- « holdings »
- « footing »
Message n°38,
Original : | <command>set-folding-markers</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-folding-markers</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 293
Rapporter un faux positif
Suggestions :
- « marqueurs »
- « margeurs »
- « marieurs »
- « marneurs »
- « markey »
Message n°40,
Original : | <command>set-line-numbers</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-line-numbers</command><arg choice="req">BOOLÉEN activer</arg> |
Message n°40,
Original : | <command>set-line-numbers</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-line-numbers</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 307
Rapporter un faux positif
Suggestions :
- « number »
- « num bers »
- « num-bers »
- « nimbera »
- « nimberas »
Message n°42,
Original : | <command>set-replace-tabs</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-replace-tabs</command><arg choice="req">BOOLÉEN activer</arg> |
Message n°46,
Original : | <command>set-show-tabs</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-show-tabs</command><arg choice="req">BOOLÉEN activer</arg> |
Message n°48,
Original : | <command>set-show-indent</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-show-indent</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 363
Rapporter un faux positif
Suggestions :
- « indente »
- « indenté »
- « IDENT »
- « iodent »
- « in dent »
Message n°50,
Original : | <command>set-indent-spaces</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-indent-spaces</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 377
Rapporter un faux positif
Suggestions :
- « indente »
- « indenté »
- « IDENT »
- « iodent »
- « in dent »
Message n°50,
Original : | <command>set-indent-spaces</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-indent-spaces</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 377
Rapporter un faux positif
Suggestions :
- « Space »
- « space »
- « espaces »
- « espacés »
- « spasmes »
Message n°52,
Original : | <command>set-mixed-indent</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-mixed-indent</command><arg choice="req">BOOLÉEN activer</arg> |
Message n°52,
Original : | <command>set-mixed-indent</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-mixed-indent</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 391
Rapporter un faux positif
Suggestions :
- « indente »
- « indenté »
- « IDENT »
- « iodent »
- « in dent »
Message n°54,
Original : | When executed, this command will additionally set space indentation enabled, and if the indent width is unspecified it will be set to half of the <option>tab-width</option> for the document at the time of execution. |
---|---|
Traduction : | Lorsqu'elle est exécutée, cette commande définit en outre l'indentation avec des espaces activée et, si la largeur d'indentation n'est pas spécifiée, elle est définie à la moitié de la <option>tab-width</option> du document au moment de l'exécution. |
Message n°55,
Original : | <command>set-word-wrap</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-word-wrap</command><arg choice="req">BOOLÉEN largeur</arg> |
Message n°57,
Original : | <command>set-replace-tabs-save</command><arg choice="req">BOOLEAN enable </arg> |
---|---|
Traduction : | <command>set-replace-tabs-save</command><arg choice="req">BOOLÉEN activer</arg> |
Message n°57,
Original : | <command>set-replace-tabs-save</command><arg choice="req">BOOLEAN enable </arg> |
---|---|
Traduction : | <command>set-replace-tabs-save</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 426
Rapporter un faux positif
Suggestions :
- « sanve »
- « salve »
- « savez »
- « slave »
- « suave »
Message n°59,
Original : | <command>set-remove-trailing-space-save</command><arg choice="req">BOOLEAN enable</arg> |
---|---|
Traduction : | <command>set-remove-trailing-space-save</command><arg choice="req">BOOLÉEN activer</arg> |
À la ligne 440
Rapporter un faux positif
Suggestions :
- « sanve »
- « salve »
- « savez »
- « slave »
- « suave »
Message n°61,
Original : | <command>set-indent-mode</command><arg choice="req">STRING name</arg> |
---|---|
Traduction : | <command>set-indent-mode</command><arg choice="req">nom de CHAÎNE</arg> |
À la ligne 454
Rapporter un faux positif
Suggestions :
- « indente »
- « indenté »
- « IDENT »
- « iodent »
- « in dent »
Message n°62,
Original : | Sets the autoindentation mode to <userinput>name</userinput>. If <userinput>name</userinput> is not known, the mode is set to 'none'. Valid modes are 'none', 'normal', 'cstyle', 'haskell', 'lilypond', 'lisp', 'python', 'ruby' and 'xml'. |
---|---|
Traduction : | Définit le mode d'indentation automatique à <userinput>nom</userinput>. Si <userinput>nom</userinput> n'est pas connu, le mode est associé à « none ». Les modes autorisés sont « aucun », « normal », « cstyle », « haskell », « lilypond », « lisp », « python », « ruby » et « xml ». |
À la ligne 461
Rapporter un faux positif
Suggestions :
- « style »
- « stylé »
- « astyle »
- « styler »
- « styles »
Message n°62,
Original : | Sets the autoindentation mode to <userinput>name</userinput>. If <userinput>name</userinput> is not known, the mode is set to 'none'. Valid modes are 'none', 'normal', 'cstyle', 'haskell', 'lilypond', 'lisp', 'python', 'ruby' and 'xml'. |
---|---|
Traduction : | Définit le mode d'indentation automatique à <userinput>nom</userinput>. Si <userinput>nom</userinput> n'est pas connu, le mode est associé à « none ». Les modes autorisés sont « aucun », « normal », « cstyle », « haskell », « lilypond », « lisp », « python », « ruby » et « xml ». |
À la ligne 461
Rapporter un faux positif
Suggestions :
- « Haskell »
- « ASpell »
- « Aspell »
- « Häckel »
- « Hazel »
Message n°62,
Original : | Sets the autoindentation mode to <userinput>name</userinput>. If <userinput>name</userinput> is not known, the mode is set to 'none'. Valid modes are 'none', 'normal', 'cstyle', 'haskell', 'lilypond', 'lisp', 'python', 'ruby' and 'xml'. |
---|---|
Traduction : | Définit le mode d'indentation automatique à <userinput>nom</userinput>. Si <userinput>nom</userinput> n'est pas connu, le mode est associé à « none ». Les modes autorisés sont « aucun », « normal », « cstyle », « haskell », « lilypond », « lisp », « python », « ruby » et « xml ». |
À la ligne 461
Rapporter un faux positif
Suggestions :
- « LilyPond »
- « kilopond »
- « kiloponds »
- « l'ilion »
Message n°62,
Original : | Sets the autoindentation mode to <userinput>name</userinput>. If <userinput>name</userinput> is not known, the mode is set to 'none'. Valid modes are 'none', 'normal', 'cstyle', 'haskell', 'lilypond', 'lisp', 'python', 'ruby' and 'xml'. |
---|---|
Traduction : | Définit le mode d'indentation automatique à <userinput>nom</userinput>. Si <userinput>nom</userinput> n'est pas connu, le mode est associé à « none ». Les modes autorisés sont « aucun », « normal », « cstyle », « haskell », « lilypond », « lisp », « python », « ruby » et « xml ». |
Message n°63,
Original : | <command>set-auto-ident</command><arg choice="req">BOOLEAN script</arg> |
---|---|
Traduction : | <command>set-auto-ident</command><arg choice="req">BOOLÉEN script</arg> |
À la ligne 468
Rapporter un faux positif
Suggestions :
- « IDENT »
- « identd »
- « iodent »
- « dent »
- « bident »
Message n°70,
Original : | <command>nn[oremap]</command><arg choice="req">STRING original</arg> <arg choice="req">STRING mapped</arg> |
---|---|
Traduction : | <command>nn[oremap]</command><arg choice="req">CHAÎNE original</arg> <arg choice="req">CHAÎNE associée</arg> |
Message n°70,
Original : | <command>nn[oremap]</command><arg choice="req">STRING original</arg> <arg choice="req">STRING mapped</arg> |
---|---|
Traduction : | <command>nn[oremap]</command><arg choice="req">CHAÎNE original</arg> <arg choice="req">CHAÎNE associée</arg> |
À la ligne 518
Rapporter un faux positif
Suggestions :
- « noremap »
- « TreeMap »
- « Preamp »
- « créma »
- « tréma »
Message n°71,
Original : | Map the key sequence <userinput>original</userinput> to <userinput>mapped</userinput>. |
---|---|
Traduction : | Mappe la séquence de touches <userinput>original</userinput> vers <userinput>mappé</userinput>. |
À la ligne 525
Rapporter un faux positif
Suggestions :
- « Nappe »
- « Nappé »
- « Napper »
- « Nappes »
- « Nappés »
Message n°71,
Original : | Map the key sequence <userinput>original</userinput> to <userinput>mapped</userinput>. |
---|---|
Traduction : | Mappe la séquence de touches <userinput>original</userinput> vers <userinput>mappé</userinput>. |
À la ligne 525
Rapporter un faux positif
Suggestions :
- « nappe »
- « nappé »
- « napper »
- « nappes »
- « nappés »
Message n°148,
Original : | <command>s///[ig]</command> <command>%s///[ig]</command> |
---|---|
Traduction : | <command>s///[ig]</command> <command>%s///[ig]</command> |
Message n°148,
Original : | <command>s///[ig]</command> <command>%s///[ig]</command> |
---|---|
Traduction : | <command>s///[ig]</command> <command>%s///[ig]</command> |
Message n°158,
Original : | Enter the command line and issue the command <userinput>%s/Miss Jensen/Ms Jones/</userinput> and hit return, you are done. |
---|---|
Traduction : | Sur la ligne de commande, saisissez <userinput>%s/Melle Dupont/Mme Martin/</userinput> et appuyez sur Entrée. Vous avez terminé. |
À la ligne 1138
Rapporter un faux positif
Suggestions :
- « Miellé »
- « Moelle »
- « Mêle »
- « Mêlé »
- « Mlle »
Message n°162,
Original : | void MyClass::DoStringOps( String &foo, String &bar, String *p, int &a, int &b ) |
---|---|
Traduction : | void MyClass::DoStringOps( String &foo, String &bar, String *p, int &a, int &b ) |
À la ligne 1166
Rapporter un faux positif
Suggestions :
- « My Class »
- « My-Class »
- « WMCLASS »
- « Class »
- « Maclasse »
Message n°162,
Original : | void MyClass::DoStringOps( String &foo, String &bar, String *p, int &a, int &b ) |
---|---|
Traduction : | void MyClass::DoStringOps( String &foo, String &bar, String *p, int &a, int &b ) |
Message n°165,
Original : | Output: <computeroutput>void MyClass::DoStringOps( const String &foo, const String &bar, String *p, const int &a, const int &b )</computeroutput> |
---|---|
Traduction : | Sortie : <computeroutput>void MyClass::DoStringOps( const String &foo, const String &bar, String *p, const int &a, const int &b )</computeroutput> |
À la ligne 1187
Rapporter un faux positif
Suggestions :
- « My Class »
- « My-Class »
- « WMCLASS »
- « Class »
- « Maclasse »
Message n°165,
Original : | Output: <computeroutput>void MyClass::DoStringOps( const String &foo, const String &bar, String *p, const int &a, const int &b )</computeroutput> |
---|---|
Traduction : | Sortie : <computeroutput>void MyClass::DoStringOps( const String &foo, const String &bar, String *p, const int &a, const int &b )</computeroutput> |
Message n°166,
Original : | Mission completed! Now, what happened? Well, we looked for some white space (<literal>\s+</literal>) followed by one or more alphabetic characters (<literal>\w+</literal>) followed by some more whitespace (<literal>\s+</literal>) followed by an ampersand, and in the process saved the alphabetic chunk and the ampersand for reuse in the replace operation. Then we replaced the matching part of our line with one whitespace followed by <quote>const</quote> followed by one whitespace followed by our saved alphabetical chunk (<literal>\1</literal>) followed by one whitespace followed by our saved ampersand (<literal>\2</literal>) |
---|---|
Traduction : | Mission réussie ! Mais que s'est-il passé ? Nous avons recherché des blancs (<literal>\s+</literal>), suivis d'un ou plusieurs caractères alphabétiques (<literal>\w+</literal>), eux-mêmes suivis d'un autre blanc (<literal>\s+</literal>) suivi d'une esperluette. Le processus a enregistré le fragment alphanumérique et l'esperluette pour le réutiliser lors de l'opération de remplacement. Puis, nous avons remplacé la partie correspondante de la ligne par un blanc suivi de « const », suivi d'un blanc, suivi de notre fragment alphanumérique enregistré (<literal>\1</literal>), lui-même suivi d'un blanc et de notre esperluette enregistrée (<literal>\2</literal>) |
À la ligne 1194
Rapporter un faux positif
Suggestions :
- « éberluée »
- « éberluées »
- « éberluâtes »
- « éberluerai »
- « éberluait »
Message n°166,
Original : | Mission completed! Now, what happened? Well, we looked for some white space (<literal>\s+</literal>) followed by one or more alphabetic characters (<literal>\w+</literal>) followed by some more whitespace (<literal>\s+</literal>) followed by an ampersand, and in the process saved the alphabetic chunk and the ampersand for reuse in the replace operation. Then we replaced the matching part of our line with one whitespace followed by <quote>const</quote> followed by one whitespace followed by our saved alphabetical chunk (<literal>\1</literal>) followed by one whitespace followed by our saved ampersand (<literal>\2</literal>) |
---|---|
Traduction : | Mission réussie ! Mais que s'est-il passé ? Nous avons recherché des blancs (<literal>\s+</literal>), suivis d'un ou plusieurs caractères alphabétiques (<literal>\w+</literal>), eux-mêmes suivis d'un autre blanc (<literal>\s+</literal>) suivi d'une esperluette. Le processus a enregistré le fragment alphanumérique et l'esperluette pour le réutiliser lors de l'opération de remplacement. Puis, nous avons remplacé la partie correspondante de la ligne par un blanc suivi de « const », suivi d'un blanc, suivi de notre fragment alphanumérique enregistré (<literal>\1</literal>), lui-même suivi d'un blanc et de notre esperluette enregistrée (<literal>\2</literal>) |
À la ligne 1194
Rapporter un faux positif
Suggestions :
- « l'éberluée »
- « l'éberluées »
- « l'éberluâtes »
- « l'éberluerai »
- « l'éberluait »
Message n°166,
Original : | Mission completed! Now, what happened? Well, we looked for some white space (<literal>\s+</literal>) followed by one or more alphabetic characters (<literal>\w+</literal>) followed by some more whitespace (<literal>\s+</literal>) followed by an ampersand, and in the process saved the alphabetic chunk and the ampersand for reuse in the replace operation. Then we replaced the matching part of our line with one whitespace followed by <quote>const</quote> followed by one whitespace followed by our saved alphabetical chunk (<literal>\1</literal>) followed by one whitespace followed by our saved ampersand (<literal>\2</literal>) |
---|---|
Traduction : | Mission réussie ! Mais que s'est-il passé ? Nous avons recherché des blancs (<literal>\s+</literal>), suivis d'un ou plusieurs caractères alphabétiques (<literal>\w+</literal>), eux-mêmes suivis d'un autre blanc (<literal>\s+</literal>) suivi d'une esperluette. Le processus a enregistré le fragment alphanumérique et l'esperluette pour le réutiliser lors de l'opération de remplacement. Puis, nous avons remplacé la partie correspondante de la ligne par un blanc suivi de « const », suivi d'un blanc, suivi de notre fragment alphanumérique enregistré (<literal>\1</literal>), lui-même suivi d'un blanc et de notre esperluette enregistrée (<literal>\2</literal>) |
À la ligne 1194
Rapporter un faux positif
Suggestions :
- « éberluée »
- « éberluées »
- « éberluâtes »
- « éberluerai »
- « éberluait »
Message n°178,
Original : | <command>join</command><arg choice="opt">STRING separator</arg> |
---|---|
Traduction : | <command>join</command><arg choice="opt">STRING séparateur</arg> |
Message n°179,
Original : | Join selected lines or whole document. Optionally takes a parameter defining a separator, for example: <userinput><command>join</command> ', '</userinput> |
---|---|
Traduction : | Assemble les lignes sélectionnées ou le document entier. Prend éventuellement un paramètre définissant un séparateur, par exemple : <userinput><command>join</command> ', '</userinput> |
Message n°188,
Original : | <command>each</command><arg choice="req">STRING script</arg> |
---|---|
Traduction : | <command>each</command><arg choice="req">STRING script</arg> |
Message n°191,
Original : | <command>each</command> 'function(lines){return lines.join(", ")}' |
---|---|
Traduction : | <command>each</command> 'function(lines){return lines.join(", ")}' |
Message n°191,
Original : | <command>each</command> 'function(lines){return lines.join(", ")}' |
---|---|
Traduction : | <command>each</command> 'function(lines){return lines.join(", ")}' |
À la ligne 1370
Rapporter un faux positif
Suggestions :
- « functionF »
- « fonction »
- « fonctions »
- « fiction »
- « faction »
Message n°191,
Original : | <command>each</command> 'function(lines){return lines.join(", ")}' |
---|---|
Traduction : | <command>each</command> 'function(lines){return lines.join(", ")}' |
À la ligne 1370
Rapporter un faux positif
Suggestions :
- « Lines »
- « limes »
- « limés »
- « lianes »
- « lignes »
Message n°191,
Original : | <command>each</command> 'function(lines){return lines.join(", ")}' |
---|---|
Traduction : | <command>each</command> 'function(lines){return lines.join(", ")}' |
À la ligne 1370
Rapporter un faux positif
Suggestions :
- « Lines »
- « limes »
- « limés »
- « lianes »
- « lignes »
Message n°191,
Original : | <command>each</command> 'function(lines){return lines.join(", ")}' |
---|---|
Traduction : | <command>each</command> 'function(lines){return lines.join(", ")}' |
Message n°193,
Original : | <command>each</command> 'lines.join(", ")' |
---|---|
Traduction : | <command>each</command> 'lines.join(", ")' |
Message n°193,
Original : | <command>each</command> 'lines.join(", ")' |
---|---|
Traduction : | <command>each</command> 'lines.join(", ")' |
À la ligne 1384
Rapporter un faux positif
Suggestions :
- « Lines »
- « limes »
- « limés »
- « lianes »
- « lignes »
Message n°193,
Original : | <command>each</command> 'lines.join(", ")' |
---|---|
Traduction : | <command>each</command> 'lines.join(", ")' |
Message n°194,
Original : | <command>filter</command><arg choice="req">STRING script</arg> |
---|---|
Traduction : | <command>filter</command><arg choice="req">STRING script</arg> |
À la ligne 1391
Rapporter un faux positif
Suggestions :
- « filtre »
- « filtré »
- « fileter »
- « filtrer »
- « filer »
Message n°197,
Original : | <command>filter</command> 'function(1){return 1.length > 0;}' |
---|---|
Traduction : | <command>filter</command> 'function(1){return 1.length > 0;}' |
À la ligne 1413
Rapporter un faux positif
Suggestions :
- « filtre »
- « filtré »
- « fileter »
- « filtrer »
- « filer »
Message n°197,
Original : | <command>filter</command> 'function(1){return 1.length > 0;}' |
---|---|
Traduction : | <command>filter</command> 'function(1){return 1.length > 0;}' |
À la ligne 1413
Rapporter un faux positif
Suggestions :
- « functionF »
- « fonction »
- « fonctions »
- « fiction »
- « faction »
Message n°198,
Original : | <command>filter</command> 'line.length > 0' |
---|---|
Traduction : | <command>filter</command> 'line.length > 0' |
À la ligne 1420
Rapporter un faux positif
Suggestions :
- « filtre »
- « filtré »
- « fileter »
- « filtrer »
- « filer »
Message n°198,
Original : | <command>filter</command> 'line.length > 0' |
---|---|
Traduction : | <command>filter</command> 'line.length > 0' |
Message n°201,
Original : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
---|---|
Traduction : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
À la ligne 1442
Rapporter un faux positif
Suggestions :
- « functionF »
- « fonction »
- « fonctions »
- « fiction »
- « faction »
Message n°201,
Original : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
---|---|
Traduction : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
Message n°201,
Original : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
---|---|
Traduction : | <command>map</command> 'function(line){return line.replace(/^s+/,"");}' |
Message n°202,
Original : | <command>map</command> 'line.replace(/^s+/,"")' |
---|---|
Traduction : | <command>map</command> 'line.replace(/^s+/,"")' |
Message n°206,
Original : | <command>goto</command><arg choice="req">INT line</arg> |
---|---|
Traduction : | <command>goto</command><arg choice="req">INT ligne</arg> |
Message n°210,
Original : | <command>find</command><arg choice="req">STRING pattern</arg> |
---|---|
Traduction : | <command>find</command><arg choice="req">STRING motif</arg> |
Message n°212,
Original : | The find command can be configured by appending a colon followed by one or more options, the form is <userinput>find:options pattern</userinput>. The following options are supported: |
---|---|
Traduction : | Il est possible de configurer la commande Chercher en ajoutant à la fin un caractère « : », suivi d'une ou plusieurs options. La forme est <userinput>find:options motif</userinput>. Les options suivantes sont prises en charge : |
Message n°213,
Original : | <command>ifind</command><arg choice="req">STRING pattern</arg> |
---|---|
Traduction : | <command>ifind</command><arg choice="req">STRING motif</arg> |
Dernière vérification : Sun Apr 21 21:25:33 2024 (actualisée une fois par semaine).